How to Select the Best Coffee Maker for Your Home or Office

Americans purchase over 14 million coffee makers each year. Since the population of our country is not growing that quickly, nor is the rate of coffee drinkers increasing by that number of people, that figure would seem to indicate that quite a few coffee makers break or are discarded every year. There’s a reason for this. The lion’s share of coffee makers in the US are cheap, plastic appliances that are not designed or manufactured to make great coffee and last a long time. The internal heating element is typically constructed of thin aluminum, which cannot withstand frequent use, and eventually it will fail to heat the water high enough (if at all). First, a brief discussion on what’s required to make great coffee. Temperature and freshness of the coffee are the two most important factors. Stale coffee that was roasted more than 30 days ago is not likely to make the same quality of coffee that you are used to drinking in some of the better coffee shop. This is an easy thing to fix. Buy your coffee in small enough quantities that you go through it within two weeks. Don’t freeze it, but keep it away from air and light, the two enemies of coffee beans. Oxidation sets in quickly, which will make the coffee taste stale and flat. Keep your beans in an airtight container in your cupboard, and grind right before brewing if at all possible.

That being said, let’s isolate this discussion to the actual machine. In order to brew coffee according to standards set by the Specialty Coffee Association of America (SCAA), the water temperature must remain between 195 and 205 degrees and the brew cycle must conclude within 6 minutes. Most coffee makers are powered with around 900 watts, and the thin aluminum heating element takes a while to heat up. Meanwhile, the water is already flowing over the coffee grounds. As the heating element slowly heats the water, the temperature will rise from approximetely 160 degrees and will gain all the way to a near boiling point (212 degrees at most elevations). The trouble with this method is that coffee has thousands of volatile compounds that will dramatically affect the flavor of the coffee. Water that is either too cold or too hot will bring out bitter tasting compounds. The 160 degree water will negatively affect the flavor, then it will be compounded by water that is too hot at the end of the cycle.

The other problem is length of time. If you’ve ever left a bag of tea sitting in your cup for too long, you won’t appreciate the result – bitter, astringent tasting tea. The same is with coffee. Most coffee makers take from 10-12 minutes to complete the brew cycle. After six minutes of brewing, the water starts to pull bitter tasting compounds out of the ground coffee.

And that is why most home coffee makers make terrible tasting coffee.

Fortunately, there are few machines that are designed to brew coffee that way it should be. Here are two choices:

Those Dutch know their coffee:

Technivorm is a Dutch company that has been manufacturing coffee makers since 1964. They design and manufacture coffee makers that fulfill all of the requirements set out by the SCAA for good coffee, plus they design their machines with a playful juxtaposition of retro with modern styling.

Their flagship machine is the Technivorm KBT-741, which retails for $265. It boasts a copper heating element instead of aluminum and is powered by 1475 watts instead of the typical 900. The water is heated up quickly in the internal copper tubing, then is quickly pushed through a glass tube and over a metal spray arm to evenly saturate the coffee grinds. It does not have a hot plate so that the coffee will not be baked as it sits on the element. Instead, a high quality vacuum thermos ensures that the coffee will stay hot for hours. The Technivorm KBT741 is designed to withstand years of constant use, and should perform for many years without needing anything besides routine cleaning. It includes a 1 year warranty, and a brief perusal around the internet will show positive reviews of the Thebestcoffeemachinereviews.

Specifications
Brews up to 8 Cups (43 oz.)
1475 Watts
15″H x 12″W x 7″D

The Technivorm is available at:

Clive Coffee with free shipping
Boyd Coffee with discounted shipping

Go bigand bold:

If you’re willing to spend a little more on a coffee maker, the Aqua Brew Express TE-216 makes hot, rich coffee and is designed to withstand constant use from an office or small restaurant. It is not for every kitchen, but for those that want a high quality machine with distinctive looks, the Aqua Brew is a good option. This machine uses advanced solid-state electronics and has a high quality, easy to maintain and clean exterior body that will last for many years.

Specifications
Brews up to 14 Cups (74 oz.)
Plumbing Required
Shown with Professional and Ultimate Servers
120 Volts, 1715 Watts, 15 Amps
16″H x 9″W x 14″D

Steel Series 4D Professional Gaming Mousepad Review

If you are serious about Online Gaming, then some products become necessities. A good mouse, keyboard, mouse skates, video cards, and yes – even your mouse pad.
Paying more than $10 for a mouse pad sounds absolutely ridiculous to most normal people, and I admit, it took quite a bit of work to rationalize a reason to spend $20 on a new mouse pad. After buying my Razer Death Adder, I decided that such an awesome mouse deserved a good surface to be placed upon. I was pretty skeptical as to just what sort of benefits it could possibly provide, but I decided to bite the bullet and go out and buy one.

So I ran out to Micro Center to pick one up.. I get it home and open the packaging. I pulled out a super thin piece of plastic, put it to the side, and looked inside the box to find a little rubber textured sheet, and a small ziplock back including some instructions and mouse skates. I started to wonder if they forgot to add the mouse pad in the package, then I looked over at the piece of plastic I first pulled out of the package and took a look at it… WHOA.. THIS IS THE MOUSE PAD? I couldn’t help but think I was a huge sucker for paying $20 for an ultra thin piece of plastic.

After examining the mouse pad, you will see that it has 2 different sides. One side is a plastic textured surface. The other side is an ultra smooth, shiny, softer feeling surface. At first I had intended on using the smooth surface, as I figured it would offer the least friction between the mouse and the pad. So I grabbed the little rubber sheet that comes with the pad and placed it on the table, (it is placed under the pad to prevent it from sliding around your desk) placed the mouse pad on top of it smooth side up.

I place my mouse on it, excited to see how my mouse feels against it. I am stunned to find out that my infrared mouse makes absolutely NO movement against this surface.. The pointer on my screen was basically paralyzed against this surface. Now I’m feeling even more upset with myself.. What was I thinking? I start to wonder how I fell for this “professional gaming mouse” crap.

Alright… So I flipped the mouse pad over, hoping that the textured surface would work.. Luckily, it did.. I must say, it felt REALLY strange. I had been so used to the feel of a cloth mouse pad, that using the textured side of the pad almost felt like a slippery sandpaper. I was feeling a bit disappointed still, but I decided since I bought it, I might as well give it a chance.

After a good 15 minutes using the pad, it starts to become pretty apparent at just how superior this surface is.. Initially the texture feels strange, but that is simply because it isn’t what you are used to. My mouse would glide effortlessly over this surface, and I started to become pretty damn addicted to it.. I pulled out my cloth pad again just to see how it felt now, and it was HORRIBLE. The cloth pad feels smooth when it’s all you know, but when you switch to a surface like this, you start to see just how much friction there is with a cloth pad.

I loaded up counter-strike and I must say – I did see a noticeable difference at how much easier it was to precisely target someone’s head when you don’t have your pad creating drag on your mouse. When you are trying to move your mouse in very small increments on a cloth pad, that drag can be detrimental to your aim – but when you can effortlessly slide your mouse across a small section of the pad, aiming becomes noticeably easier.

I had never used mouse skates before, and I wondered if they would even make a difference on my mouse.. My Death Adder has Teflon Feet, and mouse skates are made of teflon.. But out of curiosity I stuck them on the bottom of my mouse feet anyway – deciding if anything, it would preserve the condition of my mouse’s feet.

Now I didn’t get to test this before I put the mouse skates on the mouse, because I just didn’t know.. But a few times I would bump my mouse with my hand, and it would literally slide from one side of the pad to the other with barely any force. I had to recreate this a few times, because I was just surprised that the surface, and teflon skates were so slick. It literally looks like a hockey puck sliding across ice.

Embarrassingly, I actually managed to bump my mouse with my arm a few times while typing to have my mouse slide completely off my table and fall onto my hardwood floor…

With all being said, I would definitely recommend the Steel Series 4D Professional Gaming Surface if you are looking to give yourself a bit more precision in your gaming. I’ve heard a lot of people saying good things about the Steel Series Ice Mat, and I would love to try one out some day. But in the end, I’m perfectly happy with this surface, and don’t see myself shelling out any more cash for a new pad. Give it a try

p.s.

Turns out the smooth surface was created for ball mice. But lets be serious – what sort of gamer still uses ball mice? I didn’t have the chance to test it out. Just a little F.Y.I.

Picking The Right Gaming Chair

If you’re into gaming on a significant level, then among the most vital accessories you will need for your gaming process is an expert gaming chair. It is appropriate for all gaming consoles. It is necessary to be aware that gaming is among the experiences that can cause so much pressure on your hips, especially in the event the right chair isn’t utilized. While gaming” branded chairs frequently don’t provide the ergonomic smarts of office chairs, I want to explore DXRacer and similar brands.

A great deal of gaming chairs have the excellent advantage of having incorporated speakers into them. Settling upon a gaming chair may not look such an enormous thing. Pedestal gaming chairs are an ideal choice when wanting to sit a bit off the ground level.

For exclusive designs you’ll be able to review gaming chairs which look awesome. Gaming chairs are among the most recent means of creating an immersive gaming atmosphere. You’re so keen to get the optimal/optimally gaming chair but then when you begin searching for it, there are lots of alternatives, every one of which has enticing features.

So far as gaming chairs are involved, comfort is crucial. There are various sorts of gaming chairs offered on the market offering you various features, sizes and colours. The optimal/optimally gaming chair is one which includes adjustable armrests.

Gaming chairs are an intriguing bit of gear, in they can tell you a good deal about people. A lot of the gaming chairs now are ergonomically designed to supply full back support. The ideal gaming chair is the one which is easily placed anywhere. It is presently regarded as the best gaming chair in 2017 mostly on account of the extraordinary value for money it offers.

The chairs can be found in differing configurations, for example, SL2000, SL4000, and the SL5000 I will be considering today. Gaming chairs make it possible for you to connect your headphone too if you happen to don’t wish to disturb the surrounding. A little gaming chair will surely be tamper to your general comfort. Obeying these guidelines would assist you in finding your final gaming chair easily and with confidence.

Our chair has a large metallic substructure. There’s a selection of gaming chairs out there on the market. While not the most expensive expert gaming chair available on the market, the Gioteck RC5 is undoubtedly one of the very best.

The foremost reason that you are seeking a gaming chair is comfort. It’s a tricky point to accomplish when planning to get a gaming chair. Gaming chairs have burst on the current market lately as players try to find a more comfortable gaming experience. Picking up the ideal gaming chair is really a trick.

The chair works with the majority of the video games. If you sit on a cozy chair you’re feeling good and should you truly feel good, you simply play way better. It’s a cozy chair. It’s difficult to locate top quality gaming chairs in the united kingdom.

The chair includes world class ergonomic design, trustworthy performance, high-quality material and simply to mention a couple. If you simply need a chair that gives excellent comfort, there are tons of options. It truly is the greatest gaming chair and supplies amazing comfort and performance.

how a paper shredder works

It’s possible for you to choose what sort of paper you’d like it printed on, what design and colors you’d like, what shape you’d like and if you want to bring an accent. Paper is a good example of a valuable material that could be recycled. The paper is offered in a selection of size, colours, designs, etc.. Some people today attempt to use the exact same paper for each and every job they run. Stationary paper creates a great design for virtually any scrapbook. It can handle at least 10 sheets at one time and that’s really realistic one. It’s better not to need to fold a sheet of paper so as to receive it to fit in the shredder.

The more complicated The security level, the longer it requires to shred. As a way to preserve the security and safety of these documents it’s common to shred them. In conclusion, pick a paper shredder based on safety, security and simplicity of use, how much you’ll be shredding and that which you’ll be shredding. In this way, there wouldn’t be any traces left of whatever document you feed in the shredder. For instance, for individual usage, you could look at going in for a little shredder with a minimal sheet capacity so that it occupies less space and receives the task done. A cell shredder is the best method to receive established in the business and make profits. On the opposite hand, if you acquire a shredder which is not big enough you’re going to be stuck with a machine which won’t adequately manage your complete shredding requirements.

The best method to secure personal or company documents is to create use of a paper shredder. Investing in a cell shredder is a significant way to start an extremely profitable mobile document paper shredding enterprise. Today, there are a number of distinct types of industries which use paper shredding services. The best method to start wedding planning company is to develop a site on the subject, network with people online and give outstanding services to the community. If you have or manage a business which handles written documents of any sort within this time, then you ought to be shredding the documents whenever you are through with them. His business is still one of many largest producers of industrial paper shredders on earth today. There are lots of excellent manufacturers.

Paper shredders are employed in many of situations. Another thing to take into account when purchasing a paper shredder is the way much it’s going to be used. In addition, there are paper shredders that are made to shred one paper at one time, and there are a number of shredders which may shred up hundreds of papers at the same go.

Paper shredders are only able to be be used for some period of time before they must be rested. Employing paper shredders is an excellent practice and a great habit to enter. They are available in a wide variety of cutting formats. It is well-known that paper shredders are excellent for destroying sensitive info and protecting one’s identity. It would likewise serve you well to choose a shredder which goes past the usual and shreds more than mere paper.